Using Your Canister Steam System
1.Follow Steps 1-3 of General Operation section above.
Refer to Page 9 for a listing of hard floor surfaces that are recommended for cleaning with the Canister Steam System.
2.For best results, use a continuous
NOTE: To avoid warping or damage caused by heat and moisture, do not use on un- sealed hardwood or unglazed ceramic surfaces. Steam may remove the sheen from some floors that have been treated with wax.
3.The Microfiber Pad will absorb dirt and moisture during mopping. However, when you are finished you may find some residual moisture has been left behind. In this case, it is recom- mended to allow floor time to
ENGLISH 15