RIDING MOWER | MODEL NUMBER MC30 (96022001300) |
ELECTRICAL | PRODUCT NUMBER 960 22 |
LRV2 |
|
| 13 |
|
|
|
|
| 25 |
|
|
|
| 3 | 4 |
|
|
| 1 |
|
|
|
| 18 |
|
|
10 | 12 |
|
|
|
|
|
|
| |
| 20 | 21 | 22 | 23 |
|
| |||
|
|
|
| |
9 | 19 |
|
|
|
|
|
| 17 | |
|
|
|
| |
|
| 16 |
| 15 |
| 24 |
|
|
|
REVERSE OPERATION SYSTEM (ROS)
Your riding mower is equipped with a Reverse Operation System (ROS). Any attempt by the operator to travel in the reverse direc- tion with the deck clutch engaged will shut off the engine unless ignition key is placed in the ROS "ON" position.
WARNING: Backing up with the deck clutch engaged while mowing is strongly discouraged. Turning the ROS "ON", to al- low reverse operation with the deck clutch engaged, should only be done when the operator decides it is necessary to reposition the machine with the attachment engaged.
Do not mow in reverse unless absolutely necessary.
USING THE REVERSE OPERATION SYSTEM -
Only use if you are certain no children or other bystanders will enter the mowing area.
1.Move motion control lever to neutral (N) position.
2.With engine running, turn ignition key counterclockwise to ROS "ON" position.
3.Look down and behind before and while backing.
4.Slowly move motion control lever to reverse (R) position to start movement.
5.When use of the ROS is no longer needed, turn the ignition key clockwise to engine "ON" position.
ROS "ON" Position | Engine "ON" Position |
| (Normal Operating) |
TO ATTACH DEFLECTOR
1.Unhook the 2 bungees from deck to the mulch cover.
Bungee
Mulch Cover | Bungee |
2.Lift the mulch cover.
3.Attach the deflector to the hinge bracket.
Hinge Bracket
Deflector
Shield
4.Rest the mulch cover on the deflector.
5.Attach the 2 bungees from the deflector to the deck.
Deflector Shield | Mulch Cover |
TO OPERATE ON HILLS
WARNING: Do not drive up or down hills with slopes greater than 15° and do not drive across any slope. Use the slope guide at the back of this manual.
•Choose the slowest speed before starting up or down hills.
•Avoid stopping or changing speed on hills.
•If stopping is absolutely necessary, push clutch/brake pedal quickly to brake posi- tion and engage parking brake.
•Move motion control lever to neutral (N) position.
•To restart movement, slowly release parking brake and clutch/brake pedal.
•Make all turns slowly.
TO TRANSPORT
When pushing or towing your riding mower, be sure to disengage transmission by placing shifter in neutral.
•Raise mower height adjustment to its high- est position with mower height adjustment lever.
•To reengage transmission, press brake and shift out of neutral.
30 | 15 |
