McCulloch MC30 Product Specifications, Unassembled Parts, Customer Responsibilities, Riding Mower

PRODUCT SPECIFICATIONS

RIDING MOWER

MOWER DECK

MODEL NUMBER MC30 (96022001300) PRODUCT NUMBER 960 22 00-13

PRODUCT SPECIFICATIONS

Gasoline Capacity	1.5 Gallons
and Type:	Unleaded Regular
Oil Type	SAE 30 (Above 32°F)
(API SG-SL):	SAE 5W30 (Below 32°F)
Oil Capacity:	48 Oz.
Spark Plug:	Champion RC12YC
	(Gap: .030")
Ground Speed	Forward:	0	- 4
(Mph):	Reverse:	0	- 2
Charging System:	3 Amps @ Battery
Blade Bolt Torque:	45-55 Ft. Lbs.

CONGRATULATIONS on your purchase of a new riding mower. It has been designed, engineered and manufactured to give you the best possible dependability and per- formance.

Should you experience any problem you cannot easily remedy, please contact a qualified service center. We have competent, well-trained representatives and the proper tools to service or repair this riding mower.

Please read and retain this manual. The instructions will enable you to assemble and maintain your riding mower properly. Always observe the “SAFETY RULES”.

CUSTOMER RESPONSIBILITIES

•Read and observe the safety rules.

•Follow a regular schedule in maintain- ing, caring for and using your tractor.

•Follow the instructions under “Customer Responsibilities” and “Storage” sections of this owner’s manual.

WARNING: This riding mower is equipped with an internal combustion en- gine and should not be used on or near any unimproved forest-covered, brush-covered or grass-covered land unless the engine’s exhaust system is equipped with a spark arrester meeting applicable local or state laws (if any). If a spark arrester is used, it should be maintained in effective working order by the operator.

A spark arrester for the muffler is available through your nearest authorized service center/department.

In the state of California the above is required by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands.

KEY	PART
NO.	NO.	DESCRIPTION
1	532 43 68-48	DECK
2	532 19 28-70 MANDREL ASM
3	532 43 68-56	KEEPER, BELT
4	532 43 68-55 PULLEY, MANDREL
5	532 44 15-97	BELT

6532 43 68-63 COVER, MANDREL

7532 43 86-91 LIFT ASM, DECK

10	532 43 96-38	DEFLECTOR
12	532 43 66-47	PIN, HINGE

13532 43 74-62 SPRING, TORSION

14532 19 51-85 ARM, MOWER SUPPORT

17	819 19 19-12	WASHER
18	532 19 42-09	PIN

19532 19 65-39 BOLT, SHOULDER

20532 19 42-08 PIN COTTER 5/16 BOW TIE LOCK

22 532 44 15-98 LINK ASM DECK

25532 12 47-88 RETAINER SPRING 1"

26532 18 76-90 SPACER, MANDREL

27532 17 39-84 BOLT, MANDREL

28532 40 02-34 NUT FLANGE LOCK TOP

29	532 41 92-73	BLADE
30	532 19 30-03	BOLT, BLADE
31	532 19 31-97	PULLEY, IDLER
32	532 14 10-43 GUARD, IDLER TUV
34	872 11 06-12 BOLT, 3/8-16 X 1 1/2
35	532 19 94-70	ARM, BRAKE

36532 13 77-29 SCREW THD ROLL 1/4-20 X 5/8

37873 90 06-00 NUT, 3/8-16 FLANGE

40 819 17 16-16 WASHER, 16 GA.

UNASSEMBLED PARTS

48532 43 68-57 ARM CLUTCHING

49532 19 90-92 SPACER RETAINER

50817 00 06-16 SCREW 3/8-16 X 1

52817 60 04-06 SCREW 1/4-20 X 3/8

53532 40 18-72 SPRING RETURN DECK

55 532 43 79-88 E-RING 5/16

56532 43 68-62 ROD ANTI-SWAY

57819 13 13-12 WASHER 13/32 X 13/16 X 12 GA

59 532 43 68-58 GUARD TUV IDLER

61532 43 79-47 MULCH COVER ASM

62532 17 62-05 TRUNION SUSPENSION ARM

63532 17 59-94 NUT LIFT LINK 7/16-20

64817 67 06-08 SCREW THDROL 3/8-16 X 1/2

NOTE: All component dimensions given in U.S. inches 1 inch = 25.4 mm

6 39