McCulloch MC30 To Attach Front Bumper, Check Tire Pressure, To Attach Rear Bumper, Riding Mower

RIDING MOWER	MODEL NUMBER MC30 (96022001300)
STEERING	PRODUCT NUMBER 960 22 00-13

TO ATTACH FRONT BUMPER

NOTE: For ease of assembly, you may wish to obtain the assistance of another person for mounting bumper to riding mower.

1. Remove (2) screws from front chassis of

CHECK TIRE PRESSURE

The tires on your riding mower were overin- flated at the factory for shipping purposes. Correct tire pressure is important for best cutting performance.

37

38

39

23

36

34

28

						35
30	1		2
3		6			41
		7
2		7	19		16
	4
		6
		5	32		17
			12	15		2
					19	6
						7
		14	38	9	13	7
					11	6

27

26

	riding mower.
2.	Tilt the front bumper so that the bumper
	tabs catch the slots on the front of the
	chassis and lower the bumper in to place.
3.	Attach the bumper to front of chassis with
	screws removed in step 1.
4.	Tighten the two (2) screws securely.

Tab

Slot

Screw Front Bumper

TO ATTACH REAR BUMPER

NOTE: For ease of assembly, you may wish to obtain the assistance of another person for mounting bumper to riding mower.

1.Remove (4) screws from rear chassis of riding mower.

2.Position bumper as shown and assemble to rear chassis with screws removed in step 1.

3.Tighten the four (4) screws securely.

CHECK DECK LEVELNESS

For best cutting results, mower housing should be properly leveled. See “TO LEVEL MOWER HOUSING” in the Service and Adjustments section of this manual.

CHECK FOR PROPER POSITON OF MOWER DRIVE BELT

See the figure that is shown for replacing the mower drive belt in the service and adjust- ment section of this manual. Verify that the belt is routed correctly.

CHECK BRAKE SYSTEM

After you learn how to operate your riding mower, check to see that the brake is oper- ating properly.

43	20				29
	31	10			32
			42
		44		14	4
					38
				43

1

3

30

Rear Bumper

Screw

LRV-B_Steering_3 2

36 9