McDATA 4500 Using QuikSync

1-38 McDATA® Sphereon™ 4500 Fabric Switch Product Manager User Manual

Product Manager Overview

Using QuikSync QuikSync is functioning to back up data when the QuikSync icon

displays in the system tray in the right corner of the Windows taskbar

(Figure 1-11). This icon spins when data is writing to the Zip disk.

Figure1-11 QuikSync Icon in Windows System Tray

If an icon does not display, you must enable the application using the

procedure outlined in Enabling QuikSync on page 1-38.

Enabling QuikSync 1. Click the Windows Start button and select Programs, then Iomega

QuikSync and choose QuikSync.

The Iomega QuikSync dialog box displays.

Figure1-12 Iomega QuikSync Dialog Box

2. Click On to enable QuikSync.

3. Click OK.

QuikSync Settings Do not change the default settings for automatic backup of the

EfcData directory. If you feel that QuikSync is not functioning

properly, check the settings using the following steps:

1. Open the QuikSync dialog box using one of these steps: