McIntosh C45 owner manual How to Connect for Two Channel Operation, Anced Inputs

How to Connect for Two Channel Operation

How to Connect for Two Channel Operation

The C45 Audio Control Center has assignable Inputs. Be- fore the Balanced and Phono Inputs can be used, they must be first selected in the Setup Mode, refer pages 15, 17 and 18.

1.Connect Audio Cables from the McIntosh C45 RF and LF Balanced OUTPUTS to the McIntosh Power Ampli- fier Balanced INPUTS.

Note: The unbalanced RF and LF Audio OUTPUTS and unbalanced Power Amplifier Inputs may be used instead of the Balanced Connections.

2.Connect Audio Cables from the McIntosh CD Player Balanced Audio Outputs to the C45 R and L BAL-

ANCED INPUTS.

McIntosh CD Player

Note: The unbalanced Audio Outputs and CD2 INPUTS may be used instead of the Balanced Connections.

3.Connect Audio Cables from a McIntosh DVD-Audio Player 2CH Outputs to the C45 DVD INPUTS.

4.Connect an Audio Cable from a Turntable to the C45 PH/AUX INPUTS and the Turntable Ground Connec- tion to the GND grounding post.

5.Connect an Audio Cable from the C45 TAPE OUT- PUTS to the Record Inputs of a Tape Recorder and from the C45 TAPE INPUTS to a Tape Recorder Out- puts.

6.Connect the C45 Power Cord to a live AC outlet.

McIntosh DVD-Audio Player

McIntosh Power Amplifier

Turntable

in Tape Deck out

11