How to use the Remote Control
The supplied Remote Control is capable of directly con- trolling the functions of contemporary McIntosh Source Components connected to the MA6300. Earlier McIntosh source components and other brand source components can be controlled by the MA6300 Remote Control with the addition of a McIntosh Remote Control Translator (RCT).
Note: Your McIntosh Dealer can assist you with the instal- lation and operation of the Remote Control Translator (RCT).
Input Source Selection
Press the appropriate Source Push-button to select the desired program source.
Mute
Press the MUTE Push-button to mute the audio in all out- puts except the HEADPHONES and TAPE OUTPUT. The MUTE LED above the push-button will flash on and off to indicate that Mute is active. To un-mute the audio, press MUTE Push-button again.
Mono
Press the MONO Push-button to switch from Stereo to Mono for Monophonic listening.
Disc, Server and Tape Functions
Use these push-buttons to operate a DVD Player, CD Player, CD Changer, Music Server or Tape Recorder.
Numbered Push-buttons
Press Push-buttons 0 through 9 to access tuner station pre- sets, tracks on discs or selections on a Music Server.
Disc and Track
Use the DISC and TRACK Push-buttons when a Disc Player or Music Server is being used.
Tuner Push-buttons
Press the AM or FM Push-button to select the desired broadcast band. Press and release the Channel Up or Down Push-button to move from station to station. Press and hold a Channel Up or Down Push-button to move continuously from station to station. Press +10 Push-button to start the automatic brief audition of each of the pre- sets stored in the tuner memory. Press +10 Push-button a second time to stop on a station preset and exit the review process.
Volume
Press the Up or Down VOLUME Push-button to raise or lower the listening volume level.
Note: The Record Signals present at TAPE OUTPUTS are not affected by volume changes.
Pause
Press Pause Pushbutton to perform various functions on a variety of McIntosh Components. It will also pause the playing of a disc or tape player. The Pause Push-but- ton will also allow for quick exiting from the active menu when in the setup mode. The Pause Push-button is also used as an Enter Push-button with some McIntosh compo- nents
Acc On
Press ACC ON to turn the power ON to a McIntosh Disc Player.
Acc Off
Press ACC OFF to turn the power OFF to a McIntosh Disc Player..