STEP 16 - Insert Drip Cup
•Insert drip cup into hanger clip underneath grill bowl.
Drip Cup
Step 17 - Attach LP Cylinder Note: Turn all control knobs and LP cylinder valve to the “Off” position.
1. Loosen wing bolts on cylinder slide lock.
Raise to highest position and retighten.
4.Remove the protective cap from the cylinder valve. Align regulator with cylinder valve. Make sure regulator hose is not near or con- tacting any hot surfaces.
2.Place cylinder on cylinder support and hold in place. Orient cylinder with open side of collar under the grill as shown. Notice not all cylinders look alike.
•Make sure bottom of cylinder sits in notches on cylinder support. This helps prevent cylinder movement.
3.Lower the cylinder slide lock onto collar of cylinder and tighten wing bolts.
5.Insert nipple of regulator into the cylinder nozzle opening. Hand tighten coupling nut in clockwise direction. Do not use tools.
Please complete your leak test and you are now ready to use your grill!
14
