Defrosting
•Thaw milk overnight in the refrigerator, or hold the bottle under warm running water to quickly thaw. You can also place the sealed container in a bowl of warm water for 20 minutes to bring it to body temperature.
•Thawed milk is safe in the refrigerator for 24 hours.
Do not refreeze.
Caution:
• Do not thaw frozen breastmilk in a microwave or in a |
Symphony® Technical Description
SAFETY INSTRUCTIONS
Medical Electrical Equipment, Breastpump Model Symphony® 600.0837 and 600.0838
CLASSIFIED WITH RESPECT TO ELECTRIC SHOCK, FIRE AND MECHANICAL HAZARDS ONLY IN ACCORDANCE WITH
No. 601.1 22PL.
PROTECTION CLASS II | DIMENSIONS: |
| ||
(DoubleInsulation) |
| With Stand | Without Stand | |
Length | 16.1” | 8.5” | ||
| ||||
| Width | 16.1” | 6.1” | |
Type B | Height | 35.4” | 9.6” | |
WEIGHT: |
| |||
|
|
pan of boiling water. |
• Never microwave breastmilk. Microwaving can cause |
severe burns to baby’s mouth from hot spots that develop |
in the milk during microwaving. Microwaving can also |
change the composition of breastmilk. |
• If adding expressed breastmilk to container of already |
frozen breastmilk, make sure to add a lesser amount |
than the already frozen amount. |
Troubleshooting
If There Is Low or No Suction
• Make sure all connections of kit and breastpump are | |
| secure. |
• | If using a unit with a battery, make sure the battery |
| is charged. |
• | Make sure membrane is lying flat against valve head. |
VACUUM:
POWER SUPPLY:
Conventional Outlet:
DC Connection:
12VDC
25W T2.5A
Battery:
2 x 6 V, 1.2 Ah Type: Yuasa NP
Battery(optional): Battery, DC powered Charging time=12 hours Full battery pumping time=approx. 60 minutes
DISPOSAL:
With Battery: 6 lbs. 7 oz.
Without Battery: 5 lbs. 1 oz.
ENVIRONMENTAL CONDITIONS FOR OPERATION:
Temperature: +41°F to +104°F
Relative Humidity: 20% to 80%
Atmospheric Pressure: 70 kPa to 106 kPa
ENVIRONMENTAL CONDITIONS TRANSPORT AND STORAGE:
Temperature:
Relative Humidity: 20% to 95%
Atmospheric Pressure: 70 kPa to 106 kPa
STANDARDS:
FDA (GMP)
ISO 9001
ISO 13485
CE (93/42/EEC)
ELECTROMAGNETIC OR
OTHER INTERFERENCE:
Complies with IEC
Refer to the assembly instructions. |
• Make sure the hard yellow ends of the tubing fit securely |
into breastshield connectors and the other ends into the |
ports on the pump connector or membrane caps. |
• In the US, call Medela at |
In Canada, call Medela at |
In other countries, contact your local distributor or the |
location where you purchased your pump. Visit us on the |
internet at www.medela.com. |
This breastpump is made of technical plastics and metals that cannot be separated. It must be disposed of in accordance with local regulations.
WARRANTY:
Routine checks, servicing and battery exchange may only be carried out by Medela authorized personnel.
16 | 17 |