Symphony® Controls

Symphony® Program Cards

 

There are two versions of the Symphony Program Card:

 

 

the Original Symphony Program Card and the Symphony

 

2.0 Program Card. The following information is instruc-

 

tions for either card.

 

Original Symphony Program Card

 

The original Symphony Program Card is programmed to

 

operate the 2-Phase Expression.

 

1 LCD Display.

 

 

 

 

When powered off and connected

 

 

to A/C power supply, the LCD

 

 

Display will indicate “Mains”.

 

 

When batteries are used to power

 

 

the Symphony, the LCD Display will

 

 

remain blank until powered on.

 

 

 

 

The vacuum setting is indicated on the LCD Display

 

with Drops (Stimulation) and Bars (Expression).

 

2 Begin in Stimulation Phase.

 

 

 

 

Start the pump by pressing the

 

 

on/off button. The pump will

 

 

immediately begin pumping in

 

 

the Stimulation Phase. The initial

 

 

vacuum level will be indicated by

 

 

1 drop on the LCD Display.

 

 

 

 

Stimulation Phase is always limited to two minutes.

 

3 Switch to Expression Phase.

 

 

 

 

The pump will switch to Expression

 

 

Phase by one of two ways:

 

 

1) automatically, after two minute

 

 

Stimulation Phase is complete, or

 

 

2) by pressing the let-down button.

 

 

You should press the let-down

 

 

 

 

button immediately after milk ejection and continue

 

pumping in the Expression Phase.

 

 

 

8

9