Symphony® Assembly & Operation
Kit Assembly
1Follow cleaning instructions on pages
2Insert the small end of the Breastshields into the small end of the connectors. (Prior to cleaning, separate these two pieces.)
3Snap white membranes onto yellow valves until membrane lies completely flat. (Prior to cleaning, separate these two pieces.)
8To unlock case, press the oval release button on top of the Symphony® Breastpump. Keeping button depressed, lift up on the handle to open case and access pumping mechanisms.
9Push membrane/cap into place on pumping mechanism. A “click” will be heard once properly seated. To ensure proper fit, be sure to center the membrane caps’ tube ports directly over the crevice on the pump housing.
4Push api0 9.5ush api0 9.5uwish to ateaGS1 gs q BT /F0 1 Tf 8.5 0108.5. For a complete list of kits that ar11 0 0 0 1 ka cond of th Power the Symphony Breastpump
(or charge its battery if included) by connecting the power cord to a wall outlet and the socket in the back of the pump.
11 Center breastshields over nipples. Switch the breastpump on to begin the Stimulation phase by pressing the power button. Vacuum may be adjusted to your comfort level by turning the vacuum regulator knob.
After two minutes, the Stimulation
phase will automatically change to the Expression phase and you may wish to adjust the vacuum level for comfort. To single pump, simply remove one of the breastshields from your breast.
Important Note: Kits sold separately. For a complete list of kits that are compatible with the Symphony pump, please refer to the Medela Product Catalog or contact Customer Service at
Important Note: If you experience discomfort, contact your lactation professional as you may need a larger breastshield or other advice. To locate Medela products or a breastfeeding specialist in your area call
6 | 7 |