KEY TO THE VACUUM CLEANER'S | 1. | ||
PARTS | |||
| |||
1. | Handle | 2. | |
2. | Air valve | ||
| |||
3.Telescopic tube
4.Parking system
5. | Locking mechanism | 3. |
6.Hose connector
7.Carrying handle
8. | Vertical parking holder | 14. | |
9. | Storage compartment for special | 4. | |
| nozzles |
| |
10. | Handle for opening dust bag | 6. | |
11. | container | 5. | |
Exhaust grille | 11. | ||
12. | Handle for removal of exhaust grille | ||
13. | Start/stop button | 12. | |
14. | Suction force regulation | ||
| |||
15. | Button for automatic cord rewind | 17. |
16.Bag change indicator
17.Vertical parking holder
18.Floor nozzle
19. | Brush change button |
| 8. | |
20. | Extra nozzle for hard floors | |||
PREPARING THE VACUUM | ||||
21. | Furniture nozzle |
| ||
22. | Joint nozzle |
| CLEANER | |
23. | Brush nozzle |
| • Fit the hose on the vacuum cleaner by | |
|
|
| ||
|
|
| inserting the rotating hose connection | |
|
|
| (6) into the vacuum cleaner until you | |
|
|
| hear a click. To remove the hose, press | |
|
|
| the button at the side of the hose | |
| 13. |
| connection and pull it out. | |
| 9. | 21. | • Fit the telescopic tube (3) into the other | |
|
|
| ||
16.end of the hose, and fit a floor nozzle
15. |
|
| (18 or 20) to the end of the tube. |
|
|
| |
|
| 7. | • You can adjust the length of the |
|
| telescopic tube by pushing the locking | |
|
|
| |
|
|
| mechanism (5) down and pulling in the |
|
|
| bottom section of the tube to a suitable |
22. | 23. |
| length. When parking, shorten the tube |
| as far as possible. | ||
|
| ||
| 10. |
| • The vacuum cleaner’s three special |
18. 19. | 20. |
| nozzles (21, 22, 23) are kept in the |
|
|
| storage compartment (9). Remove the |
|
|
| floor nozzle and fit the special nozzle |
|
|
| required to the end of the telescopic |
|
|
| tube. |
15
