Memorex Digital Video Disc Player important safety instructions

CONNECTING THE PLAYER TO A TV USING THE AUDIO/VIDEO OUTPUT JACKS

CONNECTING THE PLAYER TO A TV USING THE S-VIDEO OUTPUT JACK

NOTES:

• If your TV has an HDMI input, connect the player with the HDMI cable for best results, otherwise use the Component, S-Video or Video OUT jack on the player.

• Set the TV’s TV/VIDEO button or switch to the VIDEO setting.

• When connecting the Player, refer to the owner’s manual of the TV, as well as this manual.

• When connecting the Player to the TV, make sure the power is off and both units are unpl ugged before making any connections.

• If your TV only has one audio input, the use of a “Y” connector may be necessary. Visit your local electronics supply store, or purchase online.

• Connect the player to your TV directly. If you connect the player through a VCR, the playback picture will be distorted because video discs are copy protected.

• The video source is always output in 480i resolution, regardless of the setup menu settings. 10