Memorex MPT -3460 manual ~ 1.Q.=~_~~ooo9

OPERATING THIS TV SET

Choice of antenna and connection

Connect the antenna to RF input terminal (Refer to the diagram below)

Antenna

~

~ 1.Q.='~_~~ooo9

300-750 adaptor

300-75Q adaptor

To get best picture and sound, a correct antenna (75,0, -axial cable) and a correct terminal are needed. If a community antenna system is used, a correct cable and jack is needed to connect the antenna and the TV set. Your local community antenna dealer can help you to get the correct antenna system and

needed assisories.

If a TV Ext. Antenna Input Jack is used, you should connect a 300-75,0, adaptor to the flat cable of the indoor antenna and then plug it into the RF input

terminal.

If there is no community antenna system or signal is weak. A set of outdoor

antenna and a signal booster is requested. If VHF antenna and flat cable are used, then 300-75,0, adaptor is needed which is connected to the flat cable and

then inserted into RF input terminal. If UHF antenna is used, a 75,0, co-axial cable and antenna jack are needed to connect to the TV set.

Note: (1) The outdoor antenna should be located in high position away from electrical wires or neon.

(2)In areas with weak signal, if an outdoor antenna cannot get ideal picture and sound, please consider to use a signal booster.

(3)During thundering and lighting, the outdoor antenna and power should be unpluged to ensure safety.

E.8