Memorex URC-3550 manual Setting Up The Super Easy, Setting Up Your Device, Setup

Setting Up The SUPER EASY

Setting Up Your Device

To set up the SUPER EASY for your Device:

1

			FOR				ALL
	ONE
		003			016,047,				093
			180,
A-Mark		179,
		180		161		052,		003,136
Admiral		055,		030,
Anam	National	019,
Anam		003					186,056
AOC		016
Archer			030,046,						046
All	&Howell		0000 000,000,

Find your Television code in the Set-Up Code section (starting on page 20). Codes are listed by brand name. The most popular code is listed first. Make sure your Television is switched on.

2

3

4

TV

SETUP

POWER

Press and release your SUPER EASY’s TV key, then press and hold down the SETUP key until the red light blinks twice (the light will blink once then twice).

Enter your three-digit TV code using the number keys. The red light will blink twice.

Now, aim the SUPER EASY at your Television and press POWER. If your Television switches off, your SUPER EASY is ready to run your Television.

Write your code in the three boxes on page 19, for quick, easy reference.

To control your Television, press TV first.

Important notes:

-To set up your Video Recorder or Satellite, follow the same instructions above, only press the VCR or SAT key during step 2.

-To set up your Cable Box, follow the instructions above only press the SAT key during step 2.

-If your Television, Video or Satellite does not respond, follow steps 1 through 4 with each code listed for your brand. If none of the codes listed for your brand operate your device, then try the search method described on page 15, even if your brand is not listed at all.

-If you change programmes on your Television through your Video Recorder, press VCR and not TV, before you use the programme keys.

-If your Video’s original remote control does not have a power key, press PLAY instead of POWER when searching for your code.

9