MBA_BA_book.book Seite 26 Mittwoch, 2. September 2009 1:30 13
Audio streaming
Pairing the audio device and Universal Media Interface
GRisk of accident
Only pair the Universal Media Interface with the audio device with the vehicle at a stand- still. Otherwise, there is a risk that you could be distracted from traffic conditions and cau- se an accident.
The Universal Media Interface and audio device must be paired before they can be used together. This can be done on either the audio device or the Universal Media In- terface.
After they have been paired, the two de- vices are automatically connected within the vehicle whenever they are switched on.
Notes
Corresponding settings may need to be configured on the audio device being used for the pairing process and for au- tomatic connection to the Universal Me- dia Interface. (Please refer to the audio device operating instructions.)
For successful pairing, the audio device and Universal Media Interface must be switched on and Bluetooth® must be en- abled. The audio device to be paired must be in the vehicle.
Pairing on the Universal Media Interface
1.Switch on the audio system and call up the base menu "Disc". (Please refer to the audio system operating instruc- tions.)
2.With the CD menu active, first switch to the AUX menu.
The last selected audio source is acti- vated.
3.If necessary, change the audio source: Select Audio streaming.
4.Enable the Bluetooth® function of the audio device and make it visible to other devices. (Please refer to the au- dio device operating instructions.)
5.Select Searching for BT devices.
All Bluetooth® audio
6.Select the desired audio device for connection setup.
7.Enter the PIN of the audio device on the Universal Media Interface and con- firm with OK. (Please refer to the audio device operating instructions.)
Note
If no PIN is specified for the audio device, a combination of numbers of your choice can be entered on the Universal Media Interface. This must then be entered on the audio device.
The paired Bluetooth® device that is compatible with audio streaming is ac- tivated by the operating system and playback of the existing audio files is started.
Pairing on the audio device
1.Switch on the audio system and call up the base menu "Disc". (Please refer to the audio system operating instruc- tions.)
2.With the CD menu active, first switch to the AUX menu.
The last selected audio source is acti- vated.
26
