21
Introduction
General operation
The system automatically stores the
volume settings on switching off.
After switching on again, the volume
may be quie ter th an wh en sw itche d off .
It is quieter if:
앫the system was switched off for more
than 15 minutes
앫or if the volume was set to a value out-
side a cert ain range wh en switching off
Automatic volume control
The automatic volume control adjusts the
volume depending on
앫the vehicle speed (only in vehicles with-
out Sound-system*)
앫or noises inside the vehicle (only in ve-
hicles with Sound-system*)
Balance and Fader
A single setting is stored for the balance
and the fader for radio, cassette and CD
mode. The system automatically stores
each setting.
The balance and the fader setting for tele-
phone mode are independent of all other
operating modes. The system automatical-
ly stores each setting.
Adjusting balance and fader:
왘Press b.
The Balance/Fader menu is displayed.
The vertical bar indicates th e balance
setting.
The horizontal bar indicates the fader
setting.
왘Press or r.
This will change the balance setting.
or
왘Press c or d.
This will change the fader setting.
왘Press the Reset soft key if desired.
This will reset the balance and the fad-
er to the center setting.
왘Press p or the Return soft key.
or
왘Wait until the Volume menu disap-
pears.
The new setting is stored.