5.Locate master link (link without extended pins, (Figure #15). Remove clips on master link (Figure #16) and remove. Pull chain out from bottom.
Figure 16
Master Link
Clip
6.With extended pins facing inward, drape new chain over the top of the coupling assembly. Make certain links of chain are meshed over sprocket and from bottom opening, lift it across transmission assembly and tension assembly sprockets. Visually check for fit over sprocket teeth and bring two ends of chain together. Install master link and clips. Repeat procedure for other chain. IMPORTANT! Align right and left side master links to insure proper alignment of baskets. (Figure #17).
17
7.Replace baskets, spring on tension brackets, front baffle, receiving tray. Delivery chute and left and right side panels.
LTransmission Assembly Re- placement:
(Figure #11)
1.Follow steps 1 thru 5 in Section K.
2.Remove drive chain, hubbed sprocket, bearing retainers and bearings. (Refer to Sections I & J )
3.Slide assembly shaft to right side and lift left end of shaft out of bearing hole and remove shaft. NOTE:
4.Inspect shaft bearing for wear or binding. Replace with new if necessary.
5.Replace new assembly in reverse order.
6.Check conveyor chain
7.Check drive chain tension. Refer to section G Step 5.
MTension Assembly Replace- ment:
(Refer to Figure #11)
1.Remove receiving tray, delivery chute, left and right side panels.
2.Remove all baskets and both conveyor chains. Refer to Section K Steps 2 thru 5.
3.Unhook tension springs from brackets. (Figure #12)
4.Remove bearing retainers and bearings.
5.Lift one end of assembly shaft and remove carrier chain from sprocket. Move chain to one side; repeat for opposite end of shaft.
6.Slide shaft to one side and lift opposite end out of bearing hole. Lift assembly out and under to clear carrier chains.
7.Reverse above procedure to install new assembly. NOTE:
8.Inspect bearing for wear or binding. Replace with new if necessary.
9.Install bearing, spring brackets and retainers. Attach springs to bracket.
10.Check conveyor chain line up. (Figure #17).
11.Install baskets, left and right side panels.
7
