Configuring sources
The 3100 loudspeakers provide 12 sources corresponding to the 12 source selection keys on the remote: CD, RADIO, DVD, AUX, DISC, TAPE, TV, CABLE, SAT, VCR1, VCR2, and GAME.
You only need to configure the sources on the 3100 loudspeaker you have specified as the master.
While in configuration mode:
•Press the source key on the remote corresponding to the source you want to configure.
For example, to configure the Radio source the display initially shows:
• Press > or < to step between options.
RD Radio
The
• Press A or V to change the value of the option.
The options are summarised in the following table:
Option | initial | Alternatives | Explanation |
| value |
|
|
Label | Radio | CD, Radio, LP, etc. | The label used to identify the source on the front |
|
|
| panel display. |
Audio input | D1 | D1 or D2. | Choose D1 or D2 to specify the input. |
Comms type | 2C | 1C – 9C, or NC. | Choose 1C for a Meridian CD player, 2C for a |
|
|
| Meridian FM Tuner, 3C for a Meridian DVD |
|
|
| player, or NC otherwise. |
Address | 1A | 1A – 8A. | Allows you to have up to eight of type. |
FIFO | FF. Y | Y or N. | Choose N to disable the FIFO buffer if you have |
|
|
| difficulty locking to a poor source. |
When you have finished programming sources:
•Switch off at the back panel, and then switch on again to restore normal operation.