Switch #1
Switch #2
3.5Connectors
The tables below identify the various connectors on the modules. The DVI-I connector is mounted to the module’s front panel on both the transmitter and receiver.
| Connectors |
Video | Standard DVI-I female (with RGBHV analog inputs/outputs) |
| DVI-I to RGBHV (HD-15 female) molded adapter (dongle) |
RGB adjustment | 4-pin USB (type B) |
Optical | Multimode - ST |
3.6Conversion Cables
There are several types of DVI connectors that are mounted on standard computers and monitors. Meridian offers standard adapter cables (6 ft length) to properly interface these various connectors to our RGB-T/R modules. The table below identifies the type of connectors and the corresponding Meridian adapter cable that should be used. The connector on the opposite end of the cable is the standard DVI-I connector that interfaces to the RGB transmitter/receiver modules.
| Computer/Input/Output | Adapter Cable | |
| Device | Part Number | |
| | | |
| HD15(M) | C-HD15-6 | |
| | | |
| DVI-I | C-DVI-I-6 | |
| Connector | | |
| | | |
| DVI-D | C-DVI-D-6 | |
| Connector | | |
| | | |
| BNC Connectors | | |
| | C-BNC-6 | |
Red Grn Blu H-Syn V-Syn
| 700 Elmont Rd, Elmont, NY 11003, Tel: 516-285-1000; Fax: 516-285-6300 |
| www.Meridian-tech.com |
Page 6 | 3/07 Rev 1.2 |
