Meridian America RGB-R-0, RGB-T-0 manual Front Panel Pinout Assignment Diagram

4.0Front Panel Pinout Assignment Diagram

Figure 4.1 below shows the front panel layout, connector location, indicator location and pinout assignment for both the RGB-T and RGB-R modules. This diagram shows the video pinouts for the on-board DVI-I video connector.

RGB/DVI-T	RGB/DVI-R
Pinout Diagram	Pinout Diagram

Figure 4.1

RGB-T-0 & RGB-R-0 Front Panel Layout Diagrams

4.1Status Indicators

There are function status indicator lights associated these modules. They are identified as follows:

Power:	Green (ON)
Diagnostic:	Green (OK), Red (alarm)
Tx Carrier (transmitter only):	Green (OK), Red (alarm)
Rx Carrier (receiver only):	Green (Present)/Red (Error)
DVI active:	Green
RGB active:	Green
SHV (sync H&V):	Green (present)
SOG (sync on green):	Green (present)
USB active:	Green (Rx-data), Red (Tx-data)

	700 Elmont Rd, Elmont, NY 11003, Tel: 516-285-1000; Fax: 516-285-6300
	www.Meridian-tech.com
Page 7	3/07 Rev 1.2