Meridian Audio 8000 manual Unpacking, Care when unpacking, Components

SETTING UP THE

DSP8000

LOUDSPEAKERS

Unpacking

Before you begin installation you should ensure that your DSP8000 loudspeakers are the correct voltage for your local AC supply. If they are not, do not try to install them, and contact your dealer.

You should not make any connections to the DSP8000 loudspeakers, or to any other component in your system, while the AC power supply is connected and switched on.

Care when unpacking

Take great care when unpacking or re-packing the DSP8000 loudspeakers that you do not put undue pressure on the side containing the drive units, as they may be damaged if pressed.

Components

Each pair of DSP8000 loudspeakers is supplied with the following components:

•The DSP8000 loudspeakers.

•Grilles packed separately.

•Six foot-mounting plates, spike clamps, spikes, and spike protectors.

•Four stabilisers.

•A hex wrench (3mm) for the drive units.

•A 10mm spanner for removing the headboard and footboard.

•Six shouldered spikes for the head unit.

•Meridian System Remote, battery and user guide.

•One power cord per speaker suitable for your territory.

•Meridian M5 lead (8 metres).

•Meridian S5 lead (8 metres).

•This user guide.

You will also need a No. 2 Pozidriv screwdriver to attach the foot mounting plate.

If any of these items is missing, please contact your dealer. We suggest that you retain the packaging carefully, as it provides maximum protection in transit.

Unpacking

To unpack the DSP8000 loudspeakers please follow the instructions on the enclosed leaflet.

10