CONFIGURING THE
DSP8000
LOUDSPEAKERS
To specify the speaker position
•Press A or V to specify the speaker position.
The options are shown in the following table:
Display Position
L.Left.
R.Right.
C.Centre (Type 6 only).
S.L. | Left surround (Type 6 only). |
S.R. | Right surround (Type 6 only). |
To choose master or slave
You should select one loudspeaker to be the master; this will normally be the centre channel. See Setting up the DSP8000 loudspeakers, page 9. The other DSP8000 loudspeakers should be configured as slaves as follows.
• Press the green > (Play) key on the remote. |
|
The display shows, | L. Slv. |
for example: | |
When you have configured the loudspeaker: |
|
•Switch off the DSP8000 loudspeaker, using the power switch on the back, and then switch on again to restore normal operation.
27
