Meridian Audio 8000 manual DSP loudspeakers

SETTING UP THE

DSP8000

LOUDSPEAKERS

To connect three or more DSP loudspeakers in a Meridian surround system

DSP loudspeaker

Centre (master)

COMMS OUTPUTINPUT			Meridian Surround Processor
DIGITAL OUTPUT			COMMS	DIGITAL OUTPUTS
		M5 lead
INPUT 1					511 S-patch box
DIGITAL 2
		S5 lead (digital unused)					S5 lead
DSP loudspeaker – Main R					DSP loudspeaker – Main L
DIGITAL INPUT		DIGITAL	COMMS	DIGITAL INPUT		DIGITAL	COMMS
2	1	OUTPUT	OUTPUT INPUT	2	1	OUTPUT	OUTPUT INPUT

S5 lead

If your system includes more than two Meridian DSP loudspeakers you may need a 511 S-patch box (available separately) to link together the S5 leads from each speaker, as shown above.

•Use the comms part of an M5 lead to connect one of the COMMS sockets on the Meridian Surround Processor to the DSP loudspeaker you have chosen as the master (typically the centre speaker).

•Use the audio part of the M5 lead to connect the DSP loudspeaker to the appropriate digital output on the Meridian Surround Processor.

•Connect the COMMS output from the master DSP loudspeaker to one socket on the 511 using an S5 lead.

•Link all the other DSP loudspeakers together in pairs using S5 leads, as shown in the illustration.

•Connect each pair of DSP loudspeakers to the appropriate digital output on the Meridian Surround Processor, using an S5 lead. The other part of the S5 lead is used to distribute the COMMS from the 511 to each pair of

DSP loudspeakers.

16