Meridian Audio 808.2I Repeat

Using the 808.2

Signature Reference

CD Player

Repeat

You can choose to play a track, disc, or selection

repeatedly, so that when it has played it will start again

from the beginning.

To continuously repeat a disc

Press Repeat (remote or under the front panel) to

select between the following options:

Display Description

Repeat track Repeat current

track.

Repeat disc Repeat entire disc.

To repeat between two positions

Press A-B (Function Repeat on the remote) at

the start of the section you want to repeat.

The display shows: Repeat A-

Move to the end of the section you want to repeat.

Press A-B (Function Repeat on the remote)

again.

The display shows: Repeat A-B

The section you have specified will be played

repeatedly.

To cancel A-B repeat

Press A-B.

To cancel the repeat function

Press Repeat (remote or under the front panel)

again.

•

Contents

Main ii Safety warnings To avoid overheating To avoid interference Radio interference Contents iv Sales and service in the UK Sales and service in the USA Designed and manufactured in the UK Page 2 The 808.2 Signature Reference CD Player Signal Processing Integrated preamplifier System integration 3 Specifications Drive Audio in and out Signal processing Controls Page Page Using the 808.2 Signature Reference CD Player Front panel keys Using the 808.2 Signature Reference CD Player MSR+ keys 8 Switching on and off To switch on from standby To insert a disc To switch to standby Playing a disc Stopping and pausing play Repeat 12 Scanning a disc To scan through a disc 13 Programming a selection To choose a track to programme To make a selection by adding tracks To make a selection by omitting tracks To add or remove a track from a selection Changing the absolute phase 15 Changing the front-panel display To change the contrast or brightness To change the displayed information 1 68:57 44k1 16Bit LPCM CD Page Page 18 Selecting a source To select a source Adjusting the system volume Page Installing the CD player 22 Unpacking Back panel 23 Installing the CD player Audio outputs Audio inputs (808.2i only) Communications connections Applications To connect to an analogue preamplifier (Type 1 or 2) To connect to an 861 Reference Digital Surround Controller (Type 1 or 2) 25 To connect to two-channel DSP loudspeakers using SpeakerLink (Type 1 or 2)Type 1 or 2) Meridian DSP Loudspeaker User Guide 26 Meridian DSP Loudspeaker User Guide 27 To connect the 808.2/808.2i to a power amplifier (Type 0 or 3)Type 0 or 3) 28 To connect to other Meridian G Series or 800 Series equipment Configuring the CD player 30 Choosing a standard setting To select a standard setting 31 Setting up sources To turn on Gain mode To turn off Gain mode To adjust the sensitivity of a source Page Index A B C D