![](/images/new-backgrounds/1240364/24036433x1.webp)
Should the ripping fence not be needed, it can be hooked in on the right leg of the table.
7.7 Mitre fence
The shiftable angle stop bar which is located on the left side of the table can be swivelled from 90° to 45°, once the locking lever has been released. The angle needed can be read directly off the scale. In case the mitre fence should not be needed, it can be swivelled sideways downwards near the switch.
7.8 Mounting the saw blade guard
After releasing the star shaped handle, the protective hood and the guard support can be pulled out upwards, or be pushed in from an upward position. Operation without the saw blade guard can cause considerable injury !
8 Adjustment
8.1 Vertical adjustment
The arc scale of the vertical adjustment is equipped with scale marks on both sides. The scale division 0