DIN HEAD UNIT PROVISION
Note: You will need to remove the after- market radio’s trim ring if equipped.
1.Cut and remove the appropriate tabs not necessary for your application. (Figure A)
2.Slide the DIN cage into the Radio Housing and secure by bending the metal locking tabs down. (Figure B)
3.Slide the aftermarket head unit into the cage and secure. (Figure C)
4.Locate the factory wiring harness and antenna plug in the dash. Metra recommends using the proper mating adapters from Metra and/or AXXESS.
5.Attach the trim plate supplied with the kit to the front of the radio housing assembly. (Figure C)
6.Reassemble dash in reverse order of disassembly.
Nissan Juke |
Nissan Versa |
Nissan Juke |
Figure A
Figure B
Figure C
3
