TOYOTA Corolla (sed/wag-upper dash) 1988-93
TOYOTA Landcruiser 1982-87
1
Disconnect the negative battery terminal to prevent an accidental short circuit. Remove
(4)screws from the top edge of the dash trim bezel. Remove (2) screws below the radio opening. Remove (1) screw from the lower- left tab of the dash trim bezel (to the right of the a/c vent). Unclip the bezel. Remove the screws securing the factory head unit and disconnect the wiring.
2 |
"A" |
"A" |
Slide Mounting Tabs #8 into slots "A" on Bracket Set #12. The Mounting Tabs, Brackets and Bracket slots can be identified by the stamped letter on each component. Skip to the Installation Instructions for ALL VEHICLES on Page #10.
1
Disconnect the negative battery terminal to prevent an accidental short circuit. Remove
(4)Phillips screws securing the factory head unit and disconnect the wiring.
2 |
"B" |
"B" |
Slide Mounting Tabs #3 and #8 into slots "B" on Bracket Set #12. The Mounting Tabs, Brackets and Bracket slots can be identified by the stamped letter on each
component. Skip to the Installation Instructions for ALL VEHICLES on Page #10.
TOYOTA Cressida 1985-87
TOYOTA Landcruiser 1988-92
1
Disconnect the negative battery terminal to prevent an accidental short circuit. Unclip the climate control trim panel and remove (2) screws exposed. Remove (2) screws above the radio opening. Unclip the dash trim bezel, disconnect the wiring and remove the bezel. Remove (4) screws securing the factory head unit and disconnect the wiring.
2 | "C" |
"C"
Slide Mounting Tabs #3 into slots "C" on Bracket Set #1. The Mounting Tabs, Brackets and Bracket slots can be identified by the stamped letter on each component. Skip to the Installation Instructions for ALL VEHICLES on Page #10.
1
Disconnect the negative battery terminal to prevent an accidental short circuit. Remove
(3)screws from the lower edge of the climate control panel. Remove (8) screws from the perimeter of the dash trim bezel. Pull out on the lower edge of the bezel and remove. Remove the screws securing the factory head unit and disconnect the wiring.
2 | "H" |
"H" |
|
Slide Mounting Tabs #3 into slots "H" on Bracket Set #1. The Mounting Tabs, Brackets and Bracket slots can be identified by the stamped letter on each component. Skip to the Installation Instructions for ALL VEHICLES on Page #10.
5
6
