METRObility Optical Systems R200 manual 2Choose an Appropriate Location

FollowInstallationthe simple steps outlined in this section toGuideinstall and start using the Radiance R200 Premise Service Platform.

NOTE: Electrostatic discharge precautions should be taken when handling any line card. Proper grounding is recommended (i.e., wear a wrist strap).

1Unpack the Platform and Accessories Check that the following components are included:

•Radiance R200 Premise Service Platform

•1 power cord (R200-AC only)

•4 rubber feet

•DC power plug connector (R200-DC only)

The following items are available separately:

•Radiance interface line cards

•Wall mounting bracket

Your order has been provided with the safest possible packaging, but shipping damage does occasionally occur. Inspect it carefully. If you discover any shipping damage, notify the carrier and follow their instructions for damage and claims. Save the original shipping carton if return or storage of the unit is necessary.

2Choose an Appropriate Location

The Radiance R200 is intended for use in office and industrial environ- ments. Attach the four rubber feet to the bottom of the unit and place it on a flat surface. The feet provide a space for air circulation.

The R200 may be oriented in any manner that allows you to make the physical connection to the power source and leaves a minimum of six

(6) inches of space around it for proper ventilation.

The R200-AC must be located within six (6) feet of the AC power source being used and placed as far away as possible from electrical noise generating equipment such as copiers, electrostatic printers and other motorized equipment. If exposed twisted-pair wiring is used nearby, the wiring should be routed as far away as possible from power cords and data cables to minimize interference.

Radiance R200 Premise Service Platform 5