-47-
Program
By pressing a/
b
button, select Program.
Press
_
/
`
button to select the program
number. You can also enter a number via
digit buttons on the remote control. There
are 100 program storage between 0 and 99.
Band
Band can be selected either “C” or “S” by
pressing
_
/`button.
Channel
Channel can be changed by
_
/
`
button or
Digit Buttons.
ColourSystem
By pressing
a
/
b
button, select Colour
System. Press
_
/
`
button to change the
colour system to PAL, SECAM, PAL60 or
AUTO.
If Sound System is set to I, SECAM isnot
available for the Colour System.
Note: In EXT mode, you can choose NTSC
3.58 and NTSC 4.43 aswell.
SoundSystem
By pressing a/
b
button, select Sound
System. Press
_
/
`
button to change the
soundsystem toBG, DK, I, LorLP.
FineTune
By pressing
a
/
b
button, select Fine Tune.
Press
_
/
`
button to adjust the tuning.
Search
By pressing a/
b
button, select Search.
Press
_
/
`
button to start programsearch-
ing. The searching will stop whena signal is
found. You can also enter a frequency value
directly by pressing the digit buttons.
VCR(Video Cassette Recorder)
•Thi s item can be seen in all modes except
EXT-3, EXT- 5, EXT-6 and PC.
•If you want to watch a VCR source from one of
thesemodes, then it will be better to set VCR
mode“on”. For this, while the cursor is on this
item press the
_
/
`
buttons to set it “On”.
• If you want to watch a DVD , then you must
setthis item “Off”.
Store Program
By pressing
a
/
b
button, select Store Pro-
gram. Press
_
/
`
or“ OK” button to store the
adjustments. “Program Stored” will be dis-
played on the screen.
Program menu
By pressing
_
/
`
button, select the fifthicon.
Program menu appears on the screen.
0
1ITV
0
2ZDF
0
3CH5
0
4C-02
0
5C-05
0
6C-06
0
7C-08
0
8C-21
0
9C-23
10 C - 35
11 C- 43
12 C- 64
13 C- 68
14 S- 40
15 -----
16 -----
17 -----
18 -----
19 -----
20 -----
Name Insert
D
elete APS
PROGRAM
By moving the cursor in four directions you can
reach 20 programmes in the same page. You
can scroll the pages up or down by pressing
the navigation buttons to see all the
programmes in TV mode (except the AV mode).
By cursor action, programme selection is
done automatically.
Name:
To change the name of a decided
programme, select the programme and
press the RED button.
The first letter of the selected name starts to
blink. Press
a
/
b
button to change that let-
terand _/`button to select the other letters.
By pressing the RED button, you can store
the name.