PCMode

Installation

Power off both Computer and Display before making any connections.

Set your PC’s resolution correctly before connecting to the TV. See the table on page 56 for supported modes.

Use a D-SUB cable to connect the TV’s PC input to the computer’s RGB output termi- nal.

15 Pin Mini D-Sub Connector

Tighten the screws of the Display cable until the connectors are fastened securely (fin- ger-tighten only).

In TV mode, you can directly enter the PC mode via pressing the PC button.

Menu System in PC mode

Press the M button. The menu will be dis- played in the middle of the screen.

PC Picture Position Menu

By pressing _ / ` button, select the first icon. PC Picture Position menu appears on the screen.

PC PICTURE POSITION

 

Autoposition

 

H Position

 

 

50

 

 

 

 

 

V Position

 

 

 

50

 

 

Dot Clock

 

 

 

50

 

 

Phase

 

 

 

50

Autoposition

If you shift the picture horizontally or vertically to an unwanted position, use this item to put the picture into correct place automatically.

Select Autoposition item by using a / b buttons.

Press ` or “OK” button.

Warning: Auto position adjustment recom- mended to be done with the full screen im- age for the proper adjustment.

H (Horizontal) Position

This item shifts the image horizontally to right hand side or left hand side of the screen.

Select H Position item by using a / b but- ton.

Use _ / ` button to adjust the value.

V (Vertical) Position

This item shifts the image vertically towards the top or bottom of the screen.

Select V Position item by using a / b but- ton.

Use _ / ` button to adjust the value.

Dot Clock

Dot Clock adjustments correct interference that appear as vertical banding in dot inten- sive presentations like spreadsheets or paragraphs or text in smaller fonts.

• Use _ / ` button to adjust the value.

Phase

Depending on the resolution and scan fre- quency that you input to the TV Set, you may see a hazy or noisy picture on the screen. In such a case you can use this item to get a clear picture by trial and error method.

• Use _ / ` button to adjust the value.

PC Picture Menu

By pressing _ / ` button, select the second icon. PC Picture menu appears on the screen.

- 49 -

Page 19
Image 19
Metz 42TN92 manual PCMode, Installation, Menu System in PC mode, PC Picture Position Menu, PC Picture Menu