Metz 42TN92 manual Ventilation, Heat and Flames, Lightning, Replacement Part, Servicing

5. Ventilation

The slots and openings on the back cover are intended for ventilation and to ensure re- liable operation. To prevent overheating, these openings must not be blocked or cov- ered in anyway.

6. Heat and Flames

The set should not be placed near to naked flames and sources of intense heat,such as an electric heater. Ensure that no naked flame sources, such as lighted candles, are placed on top of the set.

7. Lightning

In case of storm and lightning or when go- ing on holiday, disconnect the power cord from the wall outlet.

8. Replacement Part

When replacement parts are required, be sure the service technician has used replacement parts which are specified by the manufacturer or have the same specifications as the origi- nal one. Unauthorised substitutions may re- sult in fire, electrical shock, or other hazards.

9 . Servicing

Please refer all servicing to qualified per- sonnel. Do not remove the cover yourself as this may result in an electric shock.

Instructions for waste disposal:

•Packaging and packaging aids are recy- clable and should principally be recycled. Packaging materials, such as foil bag, must be kept away from children.

•Battery, including those which is heavy metal-free, should not be disposed of with household waste. Please dispose of used battery in an environmentally sound man-

ner. Find out about the legal regulations which apply in your area.

•The mains plug is used to disconnect the TV from the mains and therefore it shall remain readily operable.

Warning: To prevent injury, this device must be securely attached to the floor/wall in ac- cordance with the installation instrutions.

“The Plasma TV is a very high techology product giving you fine picture details. Occa- sionally, a few non-active pixels may remain still on the screen. Long-time unmoving still pictures may cause permanent shade effect on the screen and even the picture has been changed, its influence lasts as ghost pic- ture. This ghost effect may disturb the user even though it will diminish in the course of time. To prevent this, don't leave still pictures for example teletext pages or frozen pictures

Be sure to ground the connection properly.

Connect the ground terminal of the AC inlet of this display with the ground terminal provided

at the power outlet using the enclosed power cord. If the provided plug does not fit your outlet, consult an electrician for replacement of the obsolete outlet.

Surely connect the ground wire.

- 39 -