Metz 55TH35 - VT, 55TH34 VT operating instructions Switching on and off, Presetting stations

Switching on and off

Switching on

If the TV set is cold and is placed in a warm room, wait for any condensation on the screen to evaporate before switching the set on.

Switch the TV set on by pressing the main switch.

The TV set is now in standby mode, indicated by a red light. Single-digit programme positions can be selected with the numeri-

cal keys. . . or with the keys P or P on the remote control or with the - P + keys on the TV set

When the TV set is on, two-digit programme positions can be selec- ted by pressing the preselection key for two-digit input, followed by the numerical keys.

Switching off

Pressing the OFF key on the remote control switches the TV set to standby mode. Pressing the main switch on the TV set switches the set off completely.

Presetting stations

Stations can be preset in three different ways:

1.A.P.S. function

Automatic Programme Selection.

This function is executed automatically for the first time when the TV set is installed and switched on.

2.Station search

3.Direct channel input

1. A.P.S. function

When the TV set is switched on for the first time, the following mes- sage is displayed on the screen in terrestrial mode:

A.P.S.

PLEASE, CHECK ANTENNA CABLE

AUTO. PROGRAMMING SYSTEM

START

TV CANCEL

This function can be cancelled by pressing the ￿ key.

The A.P.S. function is started by pressing the key.

The TV set now searches the entire terrestrial reception range (recei- ved with an antenna or from cable) for stations.

Presetting stations

After the search has been completed, the station table is displayed on the screen. This could, for example, look like this:

PROGRAMM

00	----	10	C-16			20	----
01	ARD	11	C-52			21	----
02	ZDF	12	S-01			22	----
03	BR 3	13	S-06			23	----
04	RTL	14	S-16			24	----
05	RTL2	15	----			25	----
06	SAT1	16	----			26	----
07	PRO7	17	----			27	----
08	NDR	18	----			28	----
09	MDR	19	----			29	----
	SELECT				DELETE
	INSERT			AUTOSTORE

In some cases, the station logos may not be recognised during the station search. In this case, you can enter the station a logo as described on page 34.

The various programme positions in the station table can be selec- ted with the cursor keys.

P

P

You can then do the following with the selected programme position:

SELECT = pressing the red key selects this programme position

INSERT = the programme position selected with the red key can be inserted in another position in the table

DELETE = deletes the programme position

AUTOSTORE = calls the A.P.S. function (not possible for satellite stations)

• Close the menu by pressing the TV key.

2. Station search

We recommend using the station search function in order to find a single station in terrestrial or satellite mode.

• Press the BLUE key to select the menu „INSTALL“.

• Select „TUNING“ with the keys P	/P .
• Press the key to open the menu „TUNING“.
• Select „SEARCH“ by pressing the P		key.
• Start the search by pressing the	/	key.
When a station is found, the search stops. The TV set is tuned to
the centre of the related channel. If the picture is still not clear,
you can use the fine tuning function to improve it.
• Select „STORE“ by pressing the P		key and confirm the operati-
on by pressing the key.
• Close the menu by pressing the TV		key.

29