www.mgeups.com
Network
Management Cards
User Manual
3.2.5UPS weekly schedule programming
Click on the “Weekly schedule” section of the menu.
If the UPS is not compatible with this function, a warning message is sent to the user.
UPS configuration may also prevent the commands from being properly run. Read the UPS manual for more information.
The weekly schedule enables the administrator to optimise power consumption or program a reboot of the protected equipment at a set time.
In a shutdown sequence, the Network Shutdown Modules connected to the card are informed and ensure that each machine is shut down correctly before the UPS output is switched off.
Up to 7 UPS shutdown sequences can be programmed in one week, with a minimum shutdown delay of 30 minutes.
Security: the administrator clicks on “Save” and enters his/her login / password to save any edits. The login
and password by default are: MGEUPS.
T H E U N I N T E R R U P T I B L E P O W E R P R O V I D E R
Network Management Card – User Manual | 34003676EN/GA | Page 18/69 |
