www.mgeups.com
Network
Management Cards
User Manual
1.8Technical data
1.8.1 Configuration
The user can configure the card with one of the following means:
ZWeb browser
ZLocal serial link
ZTelnet console
ZBOOTP/DHCP
ZMupgrade
1.8.2 Administration
ZUp to 50 workstations protected
ZUp to 15 browsers connected at the same time
Z
ZMeasurement of temperature and humidity, adjustable thresholds, possibility of sending
ZControl of UPS on/off switching via the HTML interface
ZAdjustment and control of PowerShare outlets via the HTML interface, sequential starting of the installation and optimisation of backup time by shutting down
ZAdjustment of date and time via NTP server - Daylight Saving Time management
ZProtection by encrypted password.
ZProtection by secured connection SSL and SSH
ZSaving of logs in the
ZAutomatic language detection according to browser configuration.
ZLanguages available: English / French / Spanish / German / Italian
Z
ZCard firmware updated via the network
ZCard configuration deployment on your installed base through network utility (Mupgrade)
1.8.3 Network
ZFast ETHERNET 10/100 Mbits compatibility with
ZSNMP trap port modifiable (by default = 162)
1.8.4 MIB (Management Information Base)
ZMIB IETF UPS (RFC1628) / MIB MGE V1.7
1.8.5 Environment sensor
ZTemperature measurement from 0 to 70 °C with +/- 1°C accuracy
ZMeasurement of humidity from 0 to 100 % with +/- 6 % accuracy
ZMin / max
ZChoice of temperature readings in Celsius or Fahrenheit
ZHigh and low thresholds, hysteresis and offset adjustable via Web interface
ZPossibility of notification of status changes by
ZPosition detection of 2 dry contacts (maximum sensor/contact distance: 20 m)
ZName and status of each configurable contact
T H E U N I N T E R R U P T I B L E P O W E R P R O V I D E R
Network Management Card – User Manual | 34003676EN/GA | Page 8/69 |