www.apc.com / www.mgeups.com
THE UNINTERRUPTIBLE POWER PROVIDER
Network Shutdown Module V3 – User Manual - APC # 990-3630 (MGE # 34 003 934 XU / AB) Page 40/66
7.5.1 Introduction
Network Shutdown Module offers powerful features to easily deploy the application on several computers:
ω Silent Installation
ω Providing some command line parameters to the installer
ω Re-packaging of a customized application
According to your needs you have several possibilities:
First example:
Your computers are powered by a single UPS and you are using the Network Shutdown Module default
configuration.
ω Step 1: Copy the Network Shutdown Module package on the different computers (according to
Operating System)
ω Step 2: Execute the installation in silent mode and provide the card IP address as a parameter in the
command line
Second example:
Your computers are powered by a Multi UPS system or you don’t use Network Shutdown Module default
configuration.
ω Step 1: Install Network Shutdown Module on a computer (interactive or silent mode)
ω Step 2: Configure Network Shutdown Module
ω Step 3: Create a customized package (containing your configuration)
ω Step 4: Copy this package on the different computers (according to the Operating System)
ω Step 5: Execute the installation in silent (or possibly in interactive mode)