Vermont Castings EWF36A
Chimney Components
Component | Description | Model Number |
|
Chimney Support | Used to support chimney for each of | TCS8A | |
| 30’ vertical height and 6’ of angled chimney run | (8” flue) |
|
Firestop | Required at each floor level and attic on | FS2A (8” straight flue) | |
| FS6A (8” 30° inclined flue) |
| |
Attic Insulation Shield | Used to prevent insulation from coming in contact | FS2100HT | |
| with the chimney system.Required in Canada. |
|
|
| Optional in U.S. |
|
|
Traditional Top Housing | Top housing of simulated brick pattern | S20B | |
| available in red, tan or white. Appropriate | (single flue) | |
| adapter is required (8CA). Flashing included. |
|
|
Housing Extension | Extends Traditional Top Housing on | 202036 |
|
| steep pitched roofs | (single flue) |
|
Contemporary Chase Top | Used to terminate chimney at the top of a | SLTS8 | |
Termination | chase. Flashing is not included. |
|
|
Contemporary Flashing |
| ||
| Required for Contemporary Round Top | 0 to 6/12 pitch | |
| termination to prevent rain entry. | ||
|
| (6/12 to 12/12 pitch) |
|
Chimney Sections |
| 8” flue | |
|
| 81 (1’ long) | |
| Used to build chimney systems. | 818 (1¹⁄₂’ long) | |
|
| 83 (3’ long) | |
|
| 84 (4’ long) | |
Chimney Elbows | Used to develop offset chimney systems. |
|
|
| Only 30° elbows are available. (Elbows | ||
| packed 2 per carton - upper and lower | (8” 30° flue) | |
| elbow set.) |
|
|
Round Top Termination | Used to terminate chimney on the roof. | RLTS8 | |
| Flashing not included. | (8” flue) |
|
Extended Round Top Chase | Used to terminate chimney at the top of a | RLTS8L | |
Termination | chase. Adapter Kit included. Flashing not | (8” flue) | |
| included. |
|
|
26 | 20005167 |
