Hardware Setup
Front Panel Audio Connector: JAUD1
This connector allows you to connect the front panel audio and is compliant with Intel® Front Panel I/O Connectivity Design Guide.
| JAUD1 | 9 | 1 |
|
| 10 | 2 |
|
| HD Audio Pin Definition | |
PIN | SIGNAL | DESCRIPTION |
|
1 | MIC_L | Microphone - Left channel | |
2 | GND | Ground |
|
3 | MIC_R | Microphone - Right channel | |
4 | PRESENCE# | Active low | |
|
| is connected to the analog header. PRESENCE# = 0 when a | |
|
| High Definition Audio dongle is connected | |
5 | LINE out_R | Analog Port - Right channel | |
6 | MIC_JD | Jack detection return from front panel microphone JACK1 | |
7 | Front_JD | Jack detection sense line from the High Definition Audio CODEC | |
|
| jack detection resistor network | |
8 | NC | No control |
|
9 | LINE out_L | Analog Port - Left channel | |
10 | LINEout_JD | Jack detection return from front panel JACK2 | |
Parallel Port Header: JLPT1
This connector is used to connect an optional parallel port bracket. The parallel port is a standard printer port that supports Enhanced Parallel Port (EPP) and Extended Capabilities Parallel Port (ECP) mode.
26 | 25 |
JLPT1
|
|
| 2 | 1 |
|
|
|
PIN | SIGNAL | PIN | SIGNAL | PIN | SIGNAL | PIN | SIGNAL |
1 | RSTB# | 2 | AFD# | 15 | PRND6 | 16 | GND |
3 | PRND0 | 4 | ERR# | 17 | PRND7 | 18 | GND |
5 | PRND1 | 6 | PINIT# | 19 | ACK# | 20 | GND |
7 | PRND2 | 8 | LPT_SLIN# | 21 | BUSY | 22 | GND |
9 | PRND3 | 10 | GND | 23 | PE | 24 | GND |
11 | PRND4 | 12 | GND | 25 | SLCT | 26 | Key (No Pin) |
13 | PRND5 | 14 | GND |
|
|
|
|
