Appendix 2 LCD Messages

Normal Conditions:

Initialize SDRAM

Initialize the memory of the system.

Detect Drives

Detect what drives are connected with the system.

User Abort!

Cancel the job during operation.

Analyzing

Analyze the source disc.

Source Drive Not Ready

Source drive is not ready to read.

Target Drive Not Ready

Target drive is not ready to write.

Source Disc Not Ready

Source disc is not ready to be read.

Target Disc Not Ready

Target disc is not ready to be written into.

Erasing disc

The system is erasing the data on the disc.

Fail to get Drive Info!

The drive information cannot be obtained.

Fail to get Src Disc Info!

The information of source disc cannot be obtained.

Save new config Fail!

The new setting of configuration cannot be saved.

Load Default Config?

Do you want to load the default settings?

Preparing

The system is preparing to record.

Check Target Please Wait

The system is checking the target device.

Audio Disc!!! Can’t compare!

The system cannot compare the audio discs.

Identical

The comparison results are the same.

Read disc error

During comparison the disc cannot be read.

Cannot read TOC

The system cannot read the contents of disc.

TOC not match

The comparison results are not the same.

Target overflow

The target disc hasn’t enough capacity to store new data.

Target Disc Not Empty!!!

The target disc still has data.

Press a Key to Eject Good Disc………………Press any key to eject the good disc after copying.

Press a Key to Eject Fail Disc

Press any key to eject the failed disc after copying.

CD-RW does not Support the Func

CD-RW doesn’t support this function.

Hold ESC to exit

Press ESC for a second to terminate the test.

All data will be lost, erase?

All data on the disc will be lost. Confirm the erasing of data.

Erase Finished

The erasing of data comes to an end.

No Erasable Disc in CD-RW!!

The disc on the CD-RW device is not rewritable.

Audio Editing:

Lost selected Tracks?

Abort the selected tracks and delete them.

End edit disc and burn?

Finish the music disc editing and start to copy.

Continue edit next Disc?

Ask if you want to continue the music disc editing.

Target Overflow Re-Select

The disc capacity is not enough to store the selected tracks.

Close all disc’s session?

Confirm the closing of disc sessions.

NO AUDIO track in this disc

The source disc has no audio track.

Insert next disc

Insert the next audio disc.

Sessions were closed already!

The disc sessions have already been closed.

Tgt overflow, del last trk?

The disc capacity is not enough to store the selected tracks.

Ins empty disc Continue?

Do you want to insert a blank disc and continue copying?

Firmware Update:

Invalid firmware Disc

The disc doesn’t contain a valid firmware.

Updating F/W

The system is updating the firmware.

Update F/W xxx to yyy?

Do you want to update the firmware version from xxx to yyy?

Searching F/W

The system is searching for a valid firmware.

Check Sum Error!

The updated firmware has errors.

Last update F/W OK!

The firmware is updated successfully.

Last update F/W Fail!

The firmware is not updated successfully.

Flash ROM fail!

Data cannot be written into Flash ROM.

Page 21
Image 21
MicroBoards Technology QD-DVD user manual Appendix 2 LCD Messages, Normal Conditions, Audio Editing, Firmware Update