August 1997
PLC CPUs
IC697CSE925
64 MHz,
Features
DSupportsState Logic control programming
DSupportsfloatingpointcalculations
DSingle slot CPU.
D12K inputs and outputs (any mix).
DUp to 8K analog I/O.
D0.4 microseconds per boolean function.
D64MHz,80486DX2microprocessor.
DSupportsIC660/IC661andIC697I/Oproducts.
DProgrammed by AD641 and IC641
DProvides 1 Mbyte of
DConfigurable data and program memory.
D
DThree position operation mode switch.
DPasswordcontrolledaccess.
DRemoteprogrammerkeyswitchmemory protection
DFour status LEDs.
DSoftware configuration (No DIP switches or jumpers to set).
DReferenceinformation inside front door.
D
Functions
The CSE 925 is a single slot programmable controller CPU which provides State Logic control programming and floating point calculations. The CSE 925 can be programmed in State Logic, Relay Ladder Logic, and C to perform
The AD641 software products are used to program the CSE 925 in State Logic; the IC641
The CSE 925 communicates with I/O and smart op- tion modules over the rack mounted backplane (IC697CHS750, 782, 783, 790, 791) by way of the VME C.1 Standard format.
OK
RUN
ENABLED
MEM PROTECT
STATE LOGIC
CPU
B |
A |
T |
T |
E |
R |
Y |
CSE 925 |
TOP |
OFF |
ON |
REMOTE PROGRAMMER |
MEMORY PROTECT |
KEY POSITION |
FRONT |
MODULE OK |
RUN |
OUTPUTS |
ENABLED |
MEMORY |
PROTECT |
REMOTE |
PROGRAMMER |
ONLY |
ON = OK, ENABLED, |
PROTECTED |
RUN WITH |
OUTPUTS |
ENABLED |
RUN WITH |
OUTPUTS |
DISABLED |
STOP |
BATTERY |
CONNECTORS |
INSTALL NEW
BATTERY BEFORE
UNPLUGGING OLD
BATTERY. USE
IC697ACC701
MODULE FUNCTION
64 MHz 32 BIT CENTRAL PROCESSING UNIT WITH FLOATING POINT MATH COPROCESSOR,
SERIAL PORT
COMPATIBLE
USE THIS MODULE
IN SLOT 1 ONLY.
MODULE IC697CSE925
LABEL
r