Mounting the Scale

A maximum of two support pillars may be screwed together to allow for sufficient adjustment of the scale. If two pillars are insufficient to enable the scale to be mounted, then additional brackets will be necessary. These brackets must be sufficiently rigid to eliminate any axial movement of the scale.

Loosely fit the support link/pin assembly onto the pillar and pass the scale through the reader head and into the support pin. While gently sliding the scale forward and back 25 - 50mm (1 - 2") through the support pin, carefully tighten the hex screws on the support link, ensuring that the scale slides smoothly through the reader head and into the support pin. If any interference is detected then fully loosen the hex screws on the support link and repeat this step.

Note:

Do not force the scale through the Support Pin.

IMPORTANT WARNING:

THE CENTER LINE BORE OF THE READER HEAD MUST BE IN DIRECT ALIGNMENT WITH THE

CENTER LINE BORE OF THE SUPPORT PIN. PERMANENT DAMAGE TO SCALE AND/OR

ERRONEOUS READINGS WILL OCCUR IF THIS WARNING IS NOT FOLLOWED (REFER TO FIGURE 4.2).

Figure 4.2 - Reader head and bracket alignment

Remove the scale from the reader head and traverse the machine to its full extent in the opposite direction. Full extent means hand winding past electrical limits.

Assemble the scale support link to the scale support pin leaving approximately 3mm (1/8") gap between the bottom of the pin shoulder and the top of the link.

Slide the link/pin assembly onto the scale making certain that there is sufficient clearance between the reader head and the support link to prevent damage to the reader head cable. Do not secure the support pin to the scale at this time.

Transfer punch through the support link and into the machine casting. It is important that the support link be kept square to its mounting surface at all times.

5

Newall Measurement Systems

Page 5 Page 7
Page 6
Image 6
Microsoft SHG-VS, SHG-TC, SHG-TS, SHG-A* Absolute installation manual Reader head and bracket alignment
Page 5 Page 7

SHG-A* Absolute, SHG-VS, SHG-TS, SHG-TC specifications

Microsoft's SHG product line includes the SHG-TC, SHG-TS, SHG-VS, and SHG-A* Absolute solutions, each designed to cater to varying user needs and preferences within the tech ecosystem. These products demonstrate Microsoft's commitment to innovation, performance, and reliability, making them relevant for consumers from casual users to business professionals.

The SHG-TC, or Turbo Charge model, emphasizes efficiency and performance. It boasts an advanced processing unit that optimizes power consumption while delivering maximum output, making it ideal for users who demand high performance without compromising battery life. This model is particularly suited for applications that require significant processing power, such as gaming and graphic design.

The SHG-TS, or Turbo Ultra, builds upon the foundation set by its predecessor with enhanced thermal management techniques. This feature allows users to maintain optimal performance levels even during extended use, minimizing overheating issues. With a focus on multitasking capabilities, the SHG-TS integrates a high-speed SSD and expanded RAM options, providing a swift and responsive experience for users who work with multiple applications simultaneously.

Next in the lineup is the SHG-VS, or Vision Series. This model focuses on visual quality and clarity, making it particularly appealing to designers, photographers, and video editors. Equipped with a high-resolution display and advanced graphics capabilities, the SHG-VS ensures that colors are vibrant and images are sharp. Furthermore, it supports a wide array of creative software, allowing professionals to execute their projects with precision and ease.

Finally, the SHG-A* Absolute serves as Microsoft's premium offering, combining the best features from previous models while incorporating cutting-edge technologies. This model prioritizes user experience with a sleek design, intuitive interface, and seamless integration with other Microsoft services and devices. It includes advanced security features, such as biometric authentication, ensuring that user data remains protected at all times.

In summary, the Microsoft SHG-TC, SHG-TS, SHG-VS, and SHG-A* Absolute represent a diverse range of technological advancements, catering to various user requirements. Each model combines performance, efficiency, and innovative features, positioning Microsoft as a leader in the modern tech landscape. With their commitment to quality and user satisfaction, these products are well-suited for anyone looking to enhance their digital experience.
Top Page Image Contents