Microsoft TA61 manual Inserting Key Labels, Mounting keys

Mounting keys

Now remove this key from the key- board by pulling upwards.

If the key that has been removed has a number or character on it, you can change the lettering as follows:

Using a thin object (e.g. paper-clip etc.), press upwards against the plastic cover through the opening on the underside of the key. Please re- fer to the next chapter for instructions on how to insert the new label.

Inserting Key Labels

Below, you will find instructions on how to insert the key labels:

Transparent key co- ver with mat and

concave side up

Label for keys

Key cap

Each key should be labelled indivi- dually. You can use the empty labels delivered with the system to do so.

Place the written label on the key cap.

Insert the transparent key cover with the mat and concave side upwards until it clicks into place in the key cap.

GB - 6