Microsoft TA61 manual Releasing the Cable Connection, Self-test

Releasing the Cable Connection

Releasing the Cable Connection

Never remove a cable from a connector socket by simply pulling on the cable. Always remove the cable by the connector housing. Please follow the instructions below when removing cables:

■

■

Turn off all switches to the mains and electrical equipment.

Remove all mains cables from the shockproof sockets installed in the building.

■Loosen all cables on the electrical equipment.

➀	The mini-DIN connectors are left
	plugged in until unlocked.
	Using your thumb, pull gently on pla-
	stik connector housing ➀, removing
	the connector from the socket. This
	unlocks the connector. The metal
➁	part of the connector is now visible.
	Now remove the connector from the
	socket ➁.

Self-test

A self-test of the keyboard is performed each time the POS terminal is switched on. During this test, the interface to the system is disabled. The system is informed of the successful completion of the test.

GB - 12