SECTION 1
DESCRIPTION
II. COMPONENT FUNCTION
A. Conveyor Motor and Conveyor Belt
The conveyor belt is driven by a
B. Blower Fan
The blower fans are located at the rear of the oven. These blowers force heated air through the air fingers. The BLOWER switch must be set to “ON” or “I” for oven warmup and baking.
C. Gas Burner
The gas burner is located inside the rear panel and is controlled by the temperature controller.
D. Cooling Fan — See Figure 1-5 and Figure 1-6
The cooling fan is located in the back of the oven. The cooling fan draws air through its grille, blowing it through the blower motor compartment and the control compartments into the oven top and exhausted out the front louvers.
E. Air Fingers and Blank Plates - See Figure
An Air Finger Assembly is made up of three parts:
1.Outer Plate - The Outer Plate is the removable cover- ing with tapered holes, which direct the air stream onto the product being baked.
2.Inner Plate
3.Manifold - The Manifold is the assembly which slides on tracks into the oven plenum.
Blower Assembly
Right Control Box
Figure 1-5. Machinery Compartment
Components
4