Safety features
Overheating protection
The induction coils and the cooling element of the electronics are fitted with an overheating protection feature. This prevents the induction coils and cooling element from overheating.
This mechanism works in the following ways:
–If the booster function is being used, it will be switched off.
–The power level will be reduced.
–If an induction coil is affected, the burner will turn off and an H will appear in the display.
^Turn the control knob to "0".
Once the H has gone out, the combiset can be used again as normal.
If the control knob is not turned back to "0", C and 0 will flash in the display. To use the burner again, first turn the control knob to "0".
–If the cooling element is affected, the power supply to the burner will be reduced.
Once the cooling element has cooled sufficiently the burner will continue working again at the original power level.
–If the temperature continues to rise after the power level has been reduced, the burner will switch off.
C and 0 will flash alternately in the display.
^Turn the control knob to "0".
Once the burner has cooled to a safe temperature the combiset can be used again as normal.
The overheating protection feature may be activated by:
–heating an empty pan,
–oils or fats being heated on the highest power level,
–the underside of the appliance is not sufficiently ventilated.
If the overheating protection feature activates again, contact Miele Technical Service.
22
