Miele CS1212 installation instructions Cut out, Installation

Models: CS1212

1 48
Download 48 pages 27.64 Kb
Page 36
Image 36
Cut out

Installation

Cut out

^Make the worktop cut-out for one or more appliances as applicable. Remember to maintain a minimum safety distance from the back wall, as well as from any tall unit or side wall to the right or left of the appliance(s).

See also "SAFETY INSTRUCTIONS FOR INSTALLATION".

^Seal the cut surfaces with a suitable sealant to avoid swelling caused by moisture.

The materials used must be heat resistant.

If during installation the seal around the frame does not sit flush with the countertop in the corners, the corner radius, maximum 3/16" (4 mm), can be carefully filed down to fit.

36

Page 36
Image 36
Miele CS1212 installation instructions Cut out, Installation