Miele CS1212 Continued, Heat-uptime, approx, min : sec, Activating Auto-heat

Use

Auto-heat

When Auto-heat has been activated, the burner switches on automatically at the highest setting and then switches to the continued power level which was selected. The "heat-up" time depends on which continued power level has been chosen (see table).

Continued	Heat-up time
power level*	(approx.)
	min : sec
1	0 : 15
2	0 : 15
3	0 : 25
4	0 : 50
5	2 : 00
6	5 : 50
7	2 : 50
8	2 : 50
9	-

The higher continued cooking settings are generally used for frying, a short heat-up time is needed to heat up the pan initially.

Taking a pan off the burner while Auto-heat is in operation interrupts the function. It will resume if a pan is placed back on the burner within

3 minutes.

Activating Auto-heat

^Turn the control knob counterclockwise as far as it will go and hold until an A appears in the display.

^Turn the control knob clockwise to the desired continued power level.

Once Auto-heat has been activated the continued power level must be set within 10 seconds. After this time the level cannot be changed.

Changing the continued power level after 10 seconds will deactivate the Auto-heat function.

During the Auto-heat phase an A will show in the display.

18