Setting the serving sizes
Setting the serving size for hot water
^Place the desired cup under the hot water dispenser.
^Tap until the display reads "Prog. the amount".
^Tap again once the cup is filled as desired and "Save" appears in the display.
Each time the hot water is prepared the programmed amount will be dispensed.
Setting serving sizes via "Settings"
^Select "Settings F", confirm with OK.
Settings
Prog. the amount
Amount of coffee
^Tap < or > until "Prog. the amount" is highlighted, confirm with OK.
^Use < or > to select the beverage you wish to set a serving size for.
^Select "Start", confirm with OK.
Proceed as you would for programming using OK or .
36
