Installation
^Remove the protective foil from chimney extension.
^Bend the top hanging tabs 45° inwards. This will make installing the extension easier. Be careful of sharp edges.
Recirculation | Air extraction |
^Pull the chimney extension slightly outwards and snap over the upper retaining plate B.
When installing for recirculation, ensure that the vents are positioned so they line up with the diverter.
^Screw the extension piece firmly to the upper retaining plate using two 3.9 x 7.5 mm screws.
^Cover the screws with the supplied cap covers.
^Only for recirculation:
With the slats pointing downwards, install the recirculation vents through the extension piece and into the diverter.
39