Installation
^Pull the chimney apart slightly and slide it over the chimney extension. Do this carefully to prevent scatching the two pieces.
^Slide the chimney down aligning its lower screw holes with those on the side of retaining plate A.
^Remove the protective shields.
If the chimney is not tall enough an optional chimney extension can be ordered. See "Installation / Appliance dimensions".
^Secure the chimney to reatining plate A on both sides with two
3.9 x 7.5 mm screws.
^Remove the protective foil from the canopy.
^Before using the appliance remove the grease filter and remove the protective foil from the filter frame. Return the filter.
41
